The ophthalmic equipment Pakistan’s eye units run on — supplied, installed and kept running.
Diagnostic and surgical ophthalmic equipment for hospitals and clinics nationwide:
specified against your real case volume, commissioned properly, and held up by
engineers and spare parts inside Pakistan. We also
perform corneal cross-linking ourselves — which is
why we know what these machines have to survive.
Standard accelerated settings. The protocol for any given eye is selected on the
day by the treating surgeon, against tomography and intra-operative pachymetry.
Looking for treatment, not equipment?
If you or your child has been diagnosed with keratoconus, or your optometrist has
mentioned cross-linking, that is the other half of what we do — and it has its
own page, written for patients rather than procurement.
Licensed, not informalMedical device establishment licence under the Medical Devices Rules, 2017, with import documentation and device classification handled properly.
Engineers in-houseManufacturer-trained biomedical staff, calibration equipment carried on site visits, and spare parts held locally rather than ordered abroad.
Surgeon-led proceduresCross-linking is performed by a qualified ophthalmologist. We provide the platform, consumables and theatre support behind the clinical decision.
Documented handoverInstallation qualification, operator training and a signed commissioning report with every system — paperwork that survives an inspection.
The eye & where we fit
One diagram, two ways to read it.
Everything we supply and everything we perform addresses a specific part of this
drawing. Patients usually arrive knowing their diagnosis; clinics usually arrive
knowing their gap. Either way, this is the map — each structure listed with the
conditions that affect it and the instruments that see or treat it.
1
Cornea
Keratoconus, ectasia after laser surgery, corneal scarring and thinning.
Spectral-domain OCT · Fundus camera · B-scan · Vitrectomy
5
Optic nerve
Glaucoma damage and other optic neuropathies — often silent until late.
OCT nerve-fibre analysis · Perimetry · Fundus camera
Cross-linking sits at 1, on the cornea. It is the only one of these we perform
ourselves — the rest we equip, install, calibrate and keep running for the units
that do.
Equipment range
Instruments for the whole pathway — clinic door to operating theatre.
We specify against the list a unit actually runs, not against a catalogue.
Every category below is supplied with installation, operator training and a
service route that stays inside Pakistan.
Corneal diagnostics
Topography · Tomography · Pachymetry
Placido-disc topographers and rotating Scheimpflug tomographers for keratoconus
screening — anterior and posterior elevation maps, full pachymetry and
Kmax progression tracking. This is the layer every cross-linking decision rests on,
so we fit it first and calibrate it hardest.
Imaging & posterior segment
OCT · Fundus · B-Scan
Spectral-domain OCT for retina and glaucoma clinics, non-mydriatic fundus cameras,
and ophthalmic B-scan ultrasound — with reporting workstations, backup routines
and output that will hand off cleanly to a PACS when you add one.
Refraction & consulting room
Slit Lamp · Autoref · NCT
Slit-lamp biomicroscopes with imaging arms, autorefractor-keratometers, non-contact
tonometers, phoropters, chart projectors and complete refraction lanes — specified
as a working room rather than a list of boxes.
Cataract & vitreoretinal surgery
Phaco · Vitrectomy · Biometry
Phacoemulsification and combined phaco-vitrectomy platforms, surgical microscopes
with coaxial illumination, and optical biometers for IOL power calculation —
plus the consumable packs behind them, on a standing supply so a list never stops for stock.
Corneal cross-linking systems
Avedro KXL · Riboflavin · Sets
Avedro KXL units for accelerated epi-off and epi-on cross-linking, supplied with
riboflavin formulations, speculum and debridement sets, and the handheld pachymeter
the protocol depends on. Irradiance is verified at commissioning and at every service visit.
Sterilisation & theatre support
Class B Autoclave · Instruments
Class B autoclaves with cycle printers, ultrasonic cleaners, ophthalmic instrument
sets, operating tables and surgeon stools — the unglamorous equipment that
decides whether a full-day list finishes on time.
Service & support
Equipment is a ten-year relationship, not a delivery note.
The purchase is the cheap part. What decides whether a system earns out is who
answers when it stops mid-list — so we sell the support alongside it, in writing.
SUPPLY
Specification & procurement
We size the system to the clinic’s real case volume and room, quote against tender documents, and handle import, regulatory clearance and delivery.
INSTALL
Installation & commissioning
Siting, power and assembly, then installation qualification and a signed commissioning report you can put in front of an inspector.
TRAIN
Clinical & operator training
Hands-on training for surgeons, optometrists and theatre staff on the unit you actually bought — repeated for new joiners at no charge through the first year.
MAINTAIN
Maintenance contracts
Annual and comprehensive contracts with scheduled preventive visits, a defined response target, and loan units on the platforms where we hold them.
CALIBRATE
Calibration & verification
Irradiance checks on UVA sources, tonometer and biometer verification, and a traceable certificate issued after every visit.
PARTS
Spares & consumables
Spare parts held in Pakistan and a standing consumable supply — riboflavin, bandage lenses, phaco packs, blades — ordered on your schedule, not ours.
Tenders & procurement
We bid properly, or we tell you we can’t.
Public-sector and institutional bids fail on paperwork far more often than on price.
Send us the tender document and the closing date, and we’ll confirm whether we can
bid before you spend time chasing us. Here is what goes in the envelope.
Technical compliance sheet
Line-by-line response against your specification, stating compliance or deviation honestly rather than claiming a blanket yes.
Regulatory documentation
Establishment licence, device registration and classification under the Medical Devices Rules, 2017, plus country-of-origin and free-sale certificates.
Principal authorisation
Manufacturer authorisation letters for the platforms we are quoting, issued against your tender reference and closing date.
Warranty & after-sales undertaking
Written warranty terms, a response-time commitment for your specific location, and spare-part availability for the stated service life.
Delivery & commissioning schedule
Realistic lead times including import clearance, with installation, qualification and training dates rather than a delivery date alone.
Training & handover plan
Named trainers, session counts for surgeons and theatre staff, and the acceptance documents your biomedical department will need to sign off.
About Hospitek
A supplier that also runs the procedure — which changes how we sell it.
Most equipment vendors hand over a crate and a warranty card. Hospitek was built the
other way round: because we deliver cross-linking
ourselves, we live with the same
uptime, calibration and consumable problems our customers do. That shapes what we
agree to stock, what we’re willing to promise on response times, and what we’ll
tell you not to buy.
Registered, not informal
Hospitek operates as a DRAP-licensed medical device establishment under the Medical Devices Rules, 2017. Device classification, import documentation and post-market reporting are handled properly — which keeps your own inspections clean too.
Engineers, not just agents
Our biomedical team is trained on the platforms we sell and travels with calibration equipment. Faults get diagnosed in your theatre, not escalated to a principal abroad and left for a fortnight.
Honest specification
We will quote a smaller system — or none at all — when the case volume doesn’t carry it. A machine standing idle costs a clinic considerably more than the invoice did.
Clinical governance on procedures
Cross-linking is performed by a qualified ophthalmologist with informed consent, written documentation and structured follow-up. We supply the platform and theatre support; the clinical decision stays with the surgeon.
Common questions
Do you supply and service outside the major cities?
Yes. We run service hubs in Karachi, Lahore and Islamabad, and our engineers travel to installations across Punjab, Sindh, KP and Balochistan. Response targets differ by distance — we state the actual target for your location in the contract rather than quoting a national average we can’t hold to.
Can you service equipment we bought from another supplier?
In most cases, yes. We take on third-party equipment under maintenance contract where we can obtain parts and service documentation for the platform. We’ll inspect the unit and tell you honestly before you commit — there are models we won’t contract for, because we can’t source what breaks on them.
What are realistic lead times?
For equipment we hold or that ships from a regional warehouse, four to six weeks to commissioning. For made-to-order surgical platforms, twelve to sixteen weeks is honest, and import clearance is the part that varies most. We quote a commissioning date rather than a shipping date, because a crate sitting in your store room isn’t a working machine.
What does a maintenance contract actually cover?
An annual contract covers scheduled preventive visits, calibration with certificates, and labour on breakdown call-outs, with parts charged separately. A comprehensive contract folds parts in and adds the 24/7 line for equipment down mid-list. Both state a response target for your specific location — not a national average.
We’ll tell you which one makes sense for your case volume. On a low-volume unit, a comprehensive contract is often worse value than paying for the occasional repair.
Do you take part in tender and government procurement?
Yes. We respond to public-sector and institutional tenders and can supply the technical compliance sheets, regulatory documentation, principal authorisation letters and warranty terms these require. Send us the tender document and the closing date and we’ll confirm whether we can bid before you chase us.
Get in touch
Tell us what you need — a quotation, an engineer, or a tender response.
Every message reaches a person, not a queue. If it’s a machine down mid-list,
say so in the first line and we’ll call you back rather than reply. Patient
enquiries belong on the cross-linking page
instead — that form asks the right questions.
Office Sat–Thu, 09:00–18:00 PKT. Closed Friday.
Customers on a comprehensive maintenance contract have a
24/7 line for equipment down mid-list — the number is on your contract cover sheet.